
Flake Floor Coating System
Decorative color flakes locked inside a 100% high-solids polyaspartic coating. Textured, easy to clean, and built for Lowcountry garages, patios, and pool decks. Most homes are done in one day.

The Flake System: Color, Grip, and Forgiveness
Quick answer
A flake system is a polyaspartic floor coating with decorative color flakes broadcast into a tinted base coat, then sealed under a clear topcoat. The flakes add texture for grip, hide dust and small flaws, and give the floor a speckled, granite-like look. It’s the go-to choice for garages, and most homes are done in one day.
I spent more than ten years running car dealerships, and I learned something about floors there. A floor either makes the car look good or it pulls your eye away from it. A good flake floor does the first job on day one and keeps doing it after years of tire tracks, because the pattern hides the little stuff: dust, a dropped screw, a few grains of beach sand from Coligny.
Lindsay and I install one thing: 100% high-solids polyaspartic from Floor Shield, made in the USA and backed by a 15-year warranty. The flake system is that coating with a layer of color chips locked inside it. You pick the blend, and we handle everything from grinding to the last coat.
Why Flake Makes Sense in the Lowcountry
Think a speckled floor is just about looks? Think again. Those flakes are doing real work.
Hides the Daily Mess
Pollen, sand, and dust don’t jump out at you. A blend with two or three tones hides far more than a single solid color.
Grip When It’s Wet
The chips add texture under the topcoat. That matters when you walk in from a summer storm or step off the pool ladder.
Forgives an Old Slab
Patched cracks and old repairs fade into the pattern instead of showing through like they would under a solid color.
Matches Your House
Blends run from soft grays to warm tans and bolder mixes. Lindsay helps you pick one that works with your siding, trim, and cabinets.

Four Layers, One Day
Here’s what goes down, from the concrete up. Every layer has a job, and skipping any of them is how coatings fail.
- Diamond-ground concrete. We grind the slab to open the surface so the coating can grab on, the same idea as sanding a car before you paint it. We grind to the profile the coating calls for on the ICRI concrete surface profile (CSP) scale.
- Crack and spall repair. Cracks and chipped spots get filled and ground flush so they don’t show through the finished floor.
- Tinted polyaspartic base coat. A colored base goes down first, and we broadcast the flake into it while it’s still wet.
- Clear polyaspartic topcoat. We scrape and vacuum off the loose chips, then roll on a clear topcoat that seals the flakes inside the coating.
Want more grip for a pool deck or a sloped entry? We can build more texture into the topcoat. Want it smoother for a garage you plan to keep spotless? We can do that too.
Flake, Solid Color, Quartz, or Clear?
We install four Floor Shield systems. All four use the same polyaspartic chemistry. What changes is what goes into the floor and how it looks when we pack up.
| Flake | Solid Color | Quartz | Clear | |
|---|---|---|---|---|
| Look | Speckled, granite-like | One smooth, even color | Fine, sandy stone texture | Your own concrete, sealed |
| Hides dirt and flaws | Very well | Least of the four | Well | Shows the slab as it is |
| Grip when wet | Good, more on request | Texture can be added | The most grip | Texture can be added |
| Where it fits | Garages, patios, pool decks, walkways | Garages, porches, shops, game courts | Kitchens, locker rooms, pool decks | Concrete that already looks good |
Where We Install Flake Floors
The flake system goes almost anywhere there’s sound concrete. These are the spots we coat most.
Garages
From Hampton Lake in Bluffton to Hilton Head Plantation, garages take hot tires, oil drips, golf cart traffic, and the odd dropped cooler. Flake hides it and wipes clean.
Patios and Pool Decks
Outside, a lighter blend stays cooler underfoot in full sun and hides pollen and sand. The UV-stable topcoat keeps the color from yellowing.
Walkways and Porches
A flake front walk makes the house look finished from the street and gives everyone better footing on a wet morning.

Hilton Head Plantation garage

Hampton Lake garage, Bluffton

Full-broadcast flake garage, Hardeeville

Flake pool deck

Flake entry walkway

Shipyard garage, Hilton Head
EVERYTHING YOUR FLOORS NEED
Floor Shield Lowcountry Coating Services
One local, family-owned team for garages, patios, pool decks, and commercial floors.
How a Flake Floor Goes Down
Most residential flake floors are done in a single day. The coating is low odor, so there’s no need to leave the house.
1
Grind and Repair
We protect the walls, grind the slab, and fix cracks and chipped spots.
2
Base and Broadcast
The tinted base goes on, and we throw flake across it until the whole floor is covered.
3
Scrape and Seal
Once it sets, we scrape off the loose chips, vacuum, and roll on the clear topcoat.
4
Done by Evening
Walk on it in about 5 hours. Park on it in about 48 hours, and we’ll confirm the exact timing.
Veterans: pick any flake blend you like. Your veterans discount applies either way.
Why Choose Floor Shield Lowcountry
Your floor is only as good as the team installing it. At Floor Shield Lowcountry, we combine professional surface prep, premium polyaspartic coatings, and clear, honest communication to deliver floors that look great and hold up to Lowcountry life.

Hear From Our Happy Clients
Choosing a floor coating starts with confidence in the team behind it. Hear from customers who chose Floor Shield Lowcountry for their garages, patios, and commercial spaces, and discover what their experience was like—from the first consultation to the finished floor.
Flake System FAQs
What people ask us most about flake floors. Text 843-288-9417 if yours isn't here.
What is a flake floor coating?
It's a polyaspartic coating with decorative color flakes broadcast into the base coat and sealed under a clear topcoat. The result is a textured, speckled finish that's easy to clean.
Is a flake floor slippery?
Not under normal use. The flakes give the surface some texture under the topcoat. For pool decks, ramps, or spots that stay wet, we can add more grip.
Will the flakes come loose?
No. We scrape off the loose chips after broadcast and seal the rest under a clear topcoat, so the flakes are inside the coating, not sitting on top of it.
How many color blends can I choose from?
There's a wide range of Floor Shield flake blends, from soft grays to warm tans and bolder mixes. Browse them on our color charts page, and Lindsay will bring samples to the estimate.
Does flake hide cracks?
It hides repaired cracks very well. We fill and grind cracks first, and the pattern makes the patch hard to spot. If a slab is still moving, we'll tell you before we coat it.
Can you put flake on a patio or pool deck?
Yes. The polyaspartic topcoat is UV-stable, so it's made not to yellow in full sun, and we can build in extra texture for wet feet.
How much does a flake floor cost?
It depends on the size and condition of the slab. You get an exact, all-in price at the free on-site estimate, with no pressure to decide that day.
Is there a warranty on the flake system?
Yes. Our flake floors use Floor Shield coatings made in the USA, backed by a 15-year warranty. You get the written terms before we start.
Flake Floor Coatings Across the Lowcountry
Flake systems for garages, patios, and pool decks across five counties in South Carolina and Georgia. Find your town, or see every area we serve.
Ready for a Floor You’ll Love?
Get a free, no-pressure estimate from Bluffton’s concrete coating specialists. We’ll inspect your floor, answer your questions, and give you a clear quote.
- Free, No-Pressure Estimates
- Same-Day Installation
- Durable Coatings
- Locally Owned in Bluffton, SC

